







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Master Halco Construction
Rowan Construction Group provides independent Master Halco fence, gate and rail service and installation across Las Vegas through a network of vetted local pros who build from Master Halco’s published specs, not from big-box guesswork. Master Halco is the largest fence, rail and gate supplier in North America, so the systems are everywhere here. What separates our work is the install method: deeper concrete footings set for caliche ground, UV-rated components, and gate hardware spec’d for daily heat cycling. To be clear, Rowan Construction Group Las Vegas is not affiliated with or authorized by Master Halco; we’re an independent service provider. Call (833) 467-9123 for a free estimate.
Why Trust Rowan Construction Group Las Vegas for Your Master Halco Construction?

Our technicians have up to 19 years of experience reading these systems. They know the Pro-Series picket profile, the wall thickness on the residential aluminum lines, and which gate hardware kits seize first after a few Las Vegas summers. That matters because Master Halco components are matched across a run, and swapping in a supplier with a slightly different PVC formula is how you get fade that doesn’t match three panels down.
We use OEM-compatible parts so profiles, colors and latch tolerances stay consistent with the rest of your fence. Every job starts with a flat written price and a written scope, and no change proceeds without a signed change order, per Clause 1 of the Haven Standard. Warranty-safe service is the default: we don’t cut posts, drill gate frames, or modify hardware in ways that would give a manufacturer a reason to deny a claim. Every visit includes a documented photo record of what we found and what we did. Background-checked, uniformed technicians handle the work, and a live person answers the phone 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Fix in Las Vegas
Desert failures don’t look like failures back East. Here’s what actually goes wrong with Master Halco systems in Las Vegas, and why.
- Vinyl post and rail sagging or buckling. Usually the posts were set shallow, in plain dirt, with too little concrete, because the installer treated caliche like Midwest topsoil. Caliche is hardpan, and a post hole that won’t go deep is a post that will lean within a couple of seasons. Wind loading does the rest.
- Sun-driven fade and chalking on PVC pickets and rails. Las Vegas UV is relentless, and lower-grade vinyl substituted for genuine Master Halco stock chalks and yellows far faster than the original run. When one section fades and the rest doesn’t, that’s usually a mixed-supplier repair, not a manufacturing defect.
- Chain-link fabric sag, bent top rail, and rust at fittings. Wind-driven grit and July – September monsoon gusts work the fabric loose and pit the fittings. Privacy slats add sail area, so a slatted Master Halco galvanized run needs tighter tension and fresh fittings more often than a bare one.
- Gate frames twisting out of square. Heat cycling plus a gate that gets used every day will twist a frame that wasn’t hung with the right diagonal bracing and hinge spacing. Once it’s out of square, the latch stops catching cleanly.
- Cracked or sheared aluminum gate hinges and latch posts. Repeated daily use plus thermal expansion and contraction shears hinge pins and works latch posts loose. A 5 ft residential aluminum gate swings a lot more mass than its hardware often gets credit for.
Master Halco Parts & Our Repair-vs-Replace Approach

The parts decision is where most fence jobs either hold up or don’t. We specify genuine Master Halco rails, posts, caps and gate hardware so profiles and colors match the existing run. Mixing suppliers is what causes mismatched fade and wobbling gates; a rail that’s a hair off in wall thickness throws the whole line out of alignment. We source parts per job to fit the series and the color lot you actually have, and we don’t claim to keep local stock. We order what matches.
The repair-or-replace call is honest, not upsold. When damage is limited to a few pickets, a bent gate frame, or a single hinge, replacement beats a full rebuild every time. When posts are loose, out of plumb, or set in insufficient concrete, we reset the run rather than patching around a foundation that’s already failing. You’ll get the reasoning in the written scope, with photos. Call (833) 467-9123 for a free estimate.
Our Master Halco Service Process – Step by Step
- 1
Diagnosis. We pull a string line down the run, check every post for plumb, and notes where footings are shallow or the concrete is cracked. The gate gets opened and closed under load to see exactly where it drags.
- 2
Written scope and flat price. You get the line items in writing before anyone touches a tool: what gets reset, what gets replaced, which Master Halco components are specified. No change moves forward without your signature.
- 3
Repair or install. Bad posts get reset in proper concrete footings, cracked rails and pickets get replaced with matching stock, and gates get re-hung square with fresh hinge hardware. Work is photo-documented as it goes.
- 4
Test and hand-off. We open and close every gate, check latch engagement, and walk the run with you. You leave with the written warranty and the photo record of the job.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Products We Service & Install in Las Vegas

We handle the Master Halco lines Las Vegas homeowners actually have on their property: Pro-Series vinyl privacy fence, including 6 ft single-gate packages; aluminum ornamental fencing in the 4 ft and 5 ft residential lines; galvanized chain-link systems with privacy slats and fittings; and the vinyl and aluminum driveway and estate gates plus their gate hardware kits. Fence work here is largely block-wall and hardscape adjacent, and we cover pavers and driveway replacement too. Roof repair and tile roof repair are also on our trade list when storm or sun damage runs into the fence line.
Las Vegas Pricing for the Work This Page Covers
| Service | Typical Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
Those are market ranges, not a contract. The written quote is the number that counts.
We Also Service These Brands
Fence and gate work is one lane. Rowan Construction Group Las Vegas also works with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing, and PGT windows and doors. That multi-brand depth means the written quote reflects honest material numbers across seven trades, not a single-brand markup. If your Master Halco project grows into a patio cover, a driveway, or a gate tied into a new addition, we’re equipped to scope it in one written estimate.
FAQs – Master Halco Construction Service in Las Vegas
Is Rowan Construction Group Las Vegas authorized by Master Halco? No. We’re an independent service provider, not authorized, sponsored, or affiliated with Master Halco. We work with its systems because they’re the most common fence and gate products in Las Vegas, and we build from the manufacturer’s published specs. Our independence is also an advantage: we can specify genuine components while recommending the install method that actually survives desert heat. Call (833) 467-9123 for a free estimate.
Do you use genuine Master Halco/OEM parts? Yes. We specify genuine Master Halco rails, posts, caps and gate hardware so profiles and colors match your existing run, and we source per job to fit your series and color lot. Mixing suppliers is what produces mismatched fade and gates that wobble. Call (833) 467-9123 and we’ll confirm what your run needs.
How long does Master Halco service take? A hinge or picket swap is usually a single visit. A post reset or a gate re-hang runs longer depending on how many footings need replacing and whether the color lot has to be ordered. You’ll get the timeline in the written scope before work starts, not after. Call (833) 467-9123 for a free estimate.
What Master Halco models/series do you cover? Pro-Series vinyl privacy fence including 6 ft single-gate packages, 4 ft and 5 ft aluminum ornamental lines, galvanized chain-link systems with slats and fittings, and vinyl and aluminum driveway and estate gates with their hardware kits. Call (833) 467-9123 if you’re not sure which line you have.
Will service void my Master Halco warranty? Not when the service is done correctly. We use OEM-compatible components and avoid modifications that would give a manufacturer a reason to deny a claim, and we document each visit with photos. Warranty terms are the manufacturer’s to interpret, but our work is done to protect your coverage, not threaten it. Call (833) 467-9123 for a free estimate.
How much does Master Halco construction cost in Las Vegas? Vinyl fence installation typically runs $3,500 – $9,000, aluminum fence installation $4,000 – $10,000, and driveway replacement $5,000 – $14,000. Roof repair is $400 – $1,800 and tile roof repair $600 – $2,500. Your specific number depends on run length, footings, and gate hardware. Call (833) 467-9123 for an exact quote; estimates are free.
Book Your Master Halco Service in Las Vegas, NV
Whether it’s sagging Pro-Series rails, a chain-link run that’s lost its tension, or an aluminum gate that won’t latch, we’ll diagnose it, quote it in writing, and document the fix. Since 2007 we’ve delivered more than 4,000 projects with a written price before work started, and the 365-Day Done Right Promise backs every one. Call (833) 467-9123 for a free estimate in Las Vegas.
Written by the team at Rowan Construction Group.












