







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose PGT Construction
Rowan Construction Group Las Vegas provides independent PGT window and door service across the Las Vegas valley – installation, replacement, and repair of PGT WinGuard Aluminum and WinGuard Vinyl impact windows, WinGuard sliding glass doors, and Premier Aluminum single-hung and casement units. What sets our PGT work apart is diagnostic: we read the series-specific glazing and hardware documentation for your unit rather than a dealer’s install checklist, so we can tell you whether the failure is in the frame, the sealant, the glass unit, or the hardware before we quote anything. We are an independent PGT service provider. Rowan Construction Group is not affiliated with, authorized by, or sponsored by PGT, and we don’t claim to be. Call (833) 467-9123 for a free written estimate.
Why Trust Rowan Construction Group Las Vegas for Your PGT Construction?

PGT builds its name on wind-borne debris performance. That’s a Florida engineering problem, and it produces frames that are heavy-gauge, stiff, and finished to tight tolerances. Las Vegas builders adopted PGT for exactly those reasons – the frames hold up, the laminated glass cuts street noise, and the maintenance picture is simpler than wood or vinyl-clad alternatives.
Our technicians have up to 19 years of experience, and that time has been spent learning the difference between a PGT frame failure and a sealant failure – two problems that look identical to a homeowner and cost very different amounts to fix. We source OEM-compatible rollers, locks, operators, and weatherstripping for the series that are still supported, and we match replacement glass by thickness, tint, and impact rating rather than dropping in a generic laminated pane that changes the performance of the opening. Warranty-safe practice matters here: we document what was found and what was replaced with a photo record on every visit, so if a manufacturer warranty question ever comes up, you have evidence in hand rather than a verbal recollection. Every visit is background-checked, uniformed, and answered by a live person, 24/7. The price is written before anyone touches the unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Las Vegas
Most PGT failures in Las Vegas are not structural. They’re thermal and moisture problems that show up on the outside of a frame that’s still fundamentally sound. Here’s what we see most.
- Glazing seal and interlayer failure on WinGuard impact windows. The laminated interlayer and the perimeter seal on a sealed unit take a beating under Las Vegas UV and summers that hold above 105°F for weeks. What you see first is a faint haze at the edge of the glass, then bubbling or a milky band between the panes. That’s not condensation you can wipe away – the unit has lost its seal, and once moisture is inside the assembly, the laminated interlayer starts to delaminate. It’s a glass-unit replacement, not a frame replacement.
- Perimeter sealant failure on WinGuard Aluminum frames. Heavy-gauge aluminum expands and contracts hard in desert temperature swings – the frame moves, the sealant doesn’t keep up. After enough cycles the exterior bead pulls away at the sill and jambs, and the next July – September monsoon pushes wind-driven rain straight past the sill into drywall. This is the single most common PGT call we run in Las Vegas, and it’s usually a sealing and re-flashing job on a frame that’s otherwise fine.
- Roller and track wear on PGT WinGuard sliding glass doors. Desert dust works into the track and grinds the rollers down; heat takes the tension out of the weatherstripping. The panel starts binding, then drops and drags, then stops sealing at the jamb. Binding sashes and dropped rollers are a hardware repair. Worn weatherstripping that no longer seals is a separate, smaller fix.
- Hardware failure on Premier Aluminum casement and single-hung units. Lock and latch mechanisms, crank operators, and stripped operator arms on crank-out windows. The operator arm takes the load every time the window opens, and after a decade of heat cycling the splines strip and the window won’t hold position. OEM operator arms and locks restore the unit; aftermarket lookalikes often don’t fit the mounting pattern.
- Block-wall and stucco movement around the opening. Las Vegas slab-on-grade homes sit on expansive clay soils that swell with irrigation and shrink through the dry season, and a monsoon can move a block wall enough to open a hairline gap at the window or door perimeter. When that happens, the window isn’t failing – the opening is. We check the rough opening and the surrounding stucco before we quote a window replacement, because re-setting a unit into a moving opening just moves the leak.
PGT Parts & Our Repair-vs-Replace Approach

Parts come down to series and support. For PGT series that are still supported, we source OEM rollers, locks, latches, operators, and weatherstripping, because the mounting patterns and tolerances on these frames are specific and a generic part that “fits” often doesn’t seal or doesn’t last. We don’t claim to stock any of it locally – parts are sourced per job, and we tell you the lead time before you commit. Where a series is discontinued and OEM is unavailable, we use a matched aftermarket part and say so in the quote, in writing.
The repair-versus-replace call is honest and it usually turns on the glass and the frame, not the hardware:
- Repair when the frame and glass unit are sound and only hardware, rollers, weatherstripping, or perimeter sealant have failed. That’s a re-seal, re-flash, and hardware replacement.
- Replace when the sealed unit has lost its argon or the laminated interlayer is delaminating. Re-glazing an older PGT frame often lands close to the cost of a new impact-rated unit, and we’ll show you both numbers rather than pushing the higher one.
- Investigate the opening when the frame is moving, the stucco is cracked at the corners, or the sill is rotting. Fix the opening first or the new unit fails the same way.
Call (833) 467-9123 and we’ll write the diagnosis and the price on the same page. Estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the series and check the four failure points in order: glass unit (haze, edge delamination, bubbling between panes), perimeter sealant and flashing, rollers and weatherstripping on sliding units, and operators and locks on casement and single-hung. We photograph all four and show you what we found.
- 2
Written scope and price. You get a flat written price with a written scope before any work starts – which parts are OEM, which are matched aftermarket, and why. No work proceeds on a change until a change order is signed.
- 3
Repair or install. Re-seal and re-flash the opening, replace rollers and weatherstripping, replace hardware, or set and flash a new impact-rated unit. On July jobs we schedule the exterior work early and shade the opening, because sealant and adhesive cure badly above 105°F.
- 4
Test and document. We operate every sash, check the lock and latch engagement, water-test the sill where the scope calls for it, and hand you a documented photo record of what was found and what was done.
- 5
Warranty. Every job carries the 365-Day Done Right Promise: if it isn’t done right, Rowan makes it right. The written warranty goes on the invoice, not in an asterisk.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Las Vegas
We service and install the PGT lines you’re most likely to have on a Las Vegas home: WinGuard Aluminum impact windows (the heavy-gauge aluminum frame most common in southwest valley and Henderson builds), WinGuard Vinyl impact windows, WinGuard sliding glass doors, and Premier Aluminum single-hung and casement units. On the installation side we handle full impact window installation and window replacement for openings that have moved or where the glass has failed, and we tie window and door work into full kitchen remodeling when an opening is being reconfigured. No claim about what we stock – parts are sourced per job.
We Also Service These Brands
PGT isn’t the only line on a Las Vegas house, and we don’t treat it like one. We work across KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and Master Halco fencing, plus the fifty-plus vetted brands in our sourcing network. That range matters on a job where a window replacement turns into a kitchen reconfiguration – one written scope, one contact, one price.
FAQs – PGT Construction Service in Las Vegas

Is Rowan Construction Group Las Vegas authorized by PGT? No. We are an independent PGT service provider and are not affiliated with, authorized by, or sponsored by PGT. We work from PGT’s published series-specific glazing and hardware documentation, use OEM parts where the series is supported, and write the scope ourselves. If you need manufacturer-authorized warranty work specifically, we’ll tell you.
Do you use genuine PGT/OEM parts? Yes, where the series is still supported – PGT OEM rollers, locks, latches, operators, and weatherstripping, sourced per job. We don’t claim to stock them locally, so we quote the lead time up front. When a series is discontinued and OEM isn’t available, we use a matched aftermarket part and name it in the written quote so you can see exactly what’s going in.
How long does PGT service take? A sealant and flashing re-seal on one window or door is typically a single visit. Roller and weatherstripping replacement on a sliding door is a single visit once parts are in hand. A sealed-unit glass replacement or a full unit replacement depends on the series and the glass lead time, which we write into the scope before you commit. Call (833) 467-9123 and we’ll give you the timeline with the price, not after.
What PGT models/series do you cover? PGT WinGuard Aluminum and WinGuard Vinyl impact windows, PGT WinGuard sliding glass doors, and PGT Premier Aluminum single-hung and casement units. If you’re unsure which series you have, read the label on the frame or send us a photo of it – matching the series is the first step in sourcing the right hardware.
Will service void my PGT warranty? Not if it’s done properly, and that’s the standard we hold. The two things that can create a warranty question are non-OEM parts that alter the unit’s performance and repairs that leave the opening unsealed. We use OEM parts where supported, match glass by thickness, tint, and impact rating, and hand you a documented photo record of the work – so if a warranty question comes up, you have evidence. Ask us about your specific warranty terms before work starts.
How much does PGT construction cost in Las Vegas? Here are the line items we quote most on PGT work:
| Service | Price range in Las Vegas |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
A single sealed-unit glass replacement, roller and weatherstripping set, or perimeter re-seal sits well below those ranges, and we quote it as a line item. The price is written before any work starts, and no change proceeds without a signed change order. Call (833) 467-9123 for an exact quote – estimates are free, and we’ll review any competitor’s written estimate line by line at no charge.
Book Your PGT Service in Las Vegas, NV
If a PGT window is hazing, a sliding door is dragging, or you’re pricing an impact window installation, start with a diagnosis and a written price. Call Rowan Construction Group Las Vegas at (833) 467-9123 to schedule your free estimate. We’re an independent PGT service provider, not affiliated with PGT. Estimates are free, the price is written before any work starts, and every visit includes a documented photo record as a standard deliverable.
Written by the team at Rowan Construction Group Las Vegas.












