







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Toto Construction
Rowan Construction Group Las Vegas provides independent Toto construction service across the Las Vegas valley – repairs, replacements, and full bathroom remodels built around the Toto fixtures you already own. What sets our Toto work apart is specificity: we know which models dominate Las Vegas homes, which parts fail first in our water, and which remodel decisions keep a Toto running for years instead of months. We’re an independent Toto service provider, not affiliated with or authorized by Toto, so our recommendations follow the fixture’s condition, not a dealer’s inventory. Call (833) 467-9123 for a free estimate.
Why Trust Rowan Construction Group Las Vegas for Your Toto Construction?

Our technicians have up to 19 years of experience, and a good share of it has been spent with Toto fixtures specifically – the Drake two-piece, the Ultramax II one-piece, the Washlet seats and integrated G-series units, and the EcoPower sensor valves on commercial-style installs. That familiarity matters because Toto designs its internals differently from the commodity toilets most people grew up with. A Toto 528-style fill valve doesn’t behave like a generic ballcock. An Ultramax II tank-to-bowl gasket fails at a seam that isn’t the wax ring. A Washlet nozzle clogs from scale before the motor ever gives out.
We source genuine Toto OEM parts – fill valves, flappers, tank gaskets, Washlet nozzles and sensors – whenever the part is still in production, because aftermarket flappers and off-brand bidet components are one of the most common causes of repeat leaks and sensor faults we’re called back to fix. Every job is quoted with a flat written price and a written scope before work starts, and no change proceeds without a signed change order. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool. Service is warranty-safe: we document what we replaced, when, and with which part number, so your Toto coverage stays intact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Las Vegas
Las Vegas water runs hard – often above 250 ppm – and that single fact drives most of the Toto service calls we handle here. The models below are the ones we see most often, and the failures are consistent enough to predict.
- Washlet bidet seats (S500e, S550e, integrated G400/G450): The nozzle assembly and inlet filter scale up with calcium from Las Vegas’ hard water, and the wand stops extending or sprays weakly. Seat sensors can also fail after years of dry desert air and heat cycling. The unit usually isn’t dead – a descaled or replaced nozzle assembly brings most of them back.
- Drake two-piece (CST743/CST744 series): The fill valve hisses, runs continuously, or fails to shut off as the rubber seat degrades. Dry air accelerates the wear. Jiggling the handle masks a valve that needs replacing with the correct OEM part – aftermarket flappers are a frequent repeat-leak source here.
- Ultramax II one-piece (MS604114CEFG): The tank-to-bowl gasket weeps at the seam and corrodes the closet bolts, which gets misdiagnosed as a wax-ring leak. Left too long, the corrosion spreads into the mounting hardware.
- EcoPower and EcoVessel sensor flush valves: On commercial-style Toto fixtures, the solenoid or diaphragm clogs with scale, and the valve short-cycles or times out mid-flush. The sensor itself is usually fine; the diaphragm is the culprit.
- Wax-ring and rough-in misalignment after remodeling: When a bathroom is re-tiled or converted to a shower, the Toto fixture’s rough-in and supply location have to be planned before the tile goes up. Getting that wrong produces a rock, a wobble, or a leak at the base that no flapper fixes.
Toto Parts & Our Repair-vs-Replace Approach

We use genuine Toto OEM fill valves, flappers, tank gaskets, and Washlet nozzles and sensors whenever the part is still in production. We don’t claim to stock parts locally – every job is sourced to the specific model and series, which is why we ask for the model number off the tank lid or the Washlet control panel before we arrive. When a 15-year-old one-piece Toto needs a discontinued tank, or an integrated Washlet has a failed control board beyond economic repair, we say so plainly and quote replacement rather than chase scarce parts.
A Toto Ultramax II that starts running intermittently is a good example of how that decision usually lands. The homeowner assumes the whole toilet is failing, but the usual culprit is a scaled fill valve and a worn flapper letting water trickle past the tank-to-bowl gasket. A qualified local pro pulls the tank, inspects the closet bolts and gasket for the weeping common on one-piece Toto models, replaces the OEM fill valve and flapper, and checks supply-line pressure – often saving the fixture for a fraction of replacement cost. When the same bathroom is being re-tiled or converted to a shower, the pro plans the Toto fixture’s rough-in and supply location before the tile goes up so the toilet and any Washlet outlet land correctly. Call (833) 467-9123 for a free written estimate on either path.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact model and series – Drake, Ultramax II, Washlet S500e or S550e, EcoPower valve – then test the actual failure point: fill valve, flapper, gasket seam, nozzle assembly, solenoid, or rough-in. The diagnosis includes a documented photo record of what we found.
- 2
Repair or install. You get a flat written price and written scope before work starts. OEM parts are ordered to the model. On remodel work, we coordinate the Toto fixture’s rough-in and any Washlet electrical outlet with the tile and shower schedule so nothing gets redone.
- 3
Test. We cycle the flush, check for weeping at the tank seam and base, verify the Washlet spray pressure and sensor response, and confirm supply pressure is in range. Every visit closes with a photo record of what was done.
- 4
Warranty. We hand over a written warranty and document the part numbers replaced. Under the 365-Day Done Right Promise, if it isn’t done right, Rowan makes it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Las Vegas
We service and install the Toto lines Las Vegas homeowners actually own: Drake two-piece toilets in the CST743 and CST744 series, the Ultramax II one-piece MS604114CEFG, and the Washlet family – S500e and S550e bidet seats plus integrated G400 and G450 units. On the commercial-style side, we handle EcoPower and EcoVessel sensor faucets and flush valves. We also carry that Toto work into the adjacent bathroom projects people pair with it – full bathroom remodeling, tub-to-shower conversion, and bathroom vanity installation – so the fixture, the tile, and the supply rough-in are planned as one job.
We Also Service These Brands
Rowan Construction Group Las Vegas works across seven residential trades and more than fifty vetted material brands, so we’re not dependent on any single manufacturer. Alongside Toto, we service and install KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows and doors – which means one contractor can carry a bathroom or whole-home scope without handing off between vendors. If your project runs past the Toto fixture, the written price covers the whole job.
FAQs – Toto Construction Service in Las Vegas

No. We’re an independent Toto service provider and are not affiliated with or authorized by Toto. We work on the brand every week and use genuine OEM parts when available, but we have no dealer or manufacturer relationship. Call (833) 467-9123 with your model and we’ll tell you what we can service.
Yes, whenever the part is still in production. We use genuine Toto OEM fill valves, flappers, tank gaskets, and Washlet nozzles and sensors. Aftermarket flappers and off-brand bidet parts are a common cause of repeat leaks and sensor faults, so we avoid them on Toto fixtures unless a part is discontinued and you approve the alternative in writing.
Most single-fixture repairs finish in one visit once the correct part is on hand. Fill valve, flapper, and gasket work is typically a same-appointment job; Washlet nozzle and sensor service may need a part ordered to your model. Remodel work runs on a scheduled timeline quoted in writing. Call (833) 467-9123 to confirm timing for your model.
We cover the Drake (CST743/CST744), the Ultramax II (MS604114CEFG), Washlet S500e and S550e seats, integrated G400 and G450 units, and EcoPower and EcoVessel sensor faucets and flush valves. If your Toto model isn’t on that list, call (833) 467-9123 with the model number and we’ll confirm.
Proper service with genuine OEM parts and documented work should not void your Toto warranty, though the final call is Toto’s. We document what we replaced and with which part number so your coverage stays intact and verifiable. Bring any warranty questions to your free estimate and we’ll review them.
Probably not. Chalky buildup on the nozzle is calcium scale from Las Vegas’ hard water, and a descaled or replaced nozzle assembly usually restores the spray. The inlet filter often needs cleaning too. Call (833) 467-9123 for an exact quote – estimates are free.
Your fill valve or flapper is worn, and jiggling only masks it. Dry indoor air degrades the rubber seat, so the valve never fully shuts off. The fix is the correct OEM fill valve and flapper, not a handle adjustment. Call (833) 467-9123 for a written price.
Often yes. A weeping Ultramax II gasket and corroded closet bolts are usually fixable with an OEM gasket and hardware, provided the seam hasn’t corroded past repair. We inspect before quoting replacement. Call (833) 467-9123 to schedule a diagnosis.
Yes – you need a power outlet within reach of the Washlet and a confirmed rough-in location planned before tile goes up. Planning that early prevents tearing out finished work later. Call (833) 467-9123 and we’ll build it into your remodel scope.
Repair usually wins if the part is still in production and the ceramic is sound; replacement makes more sense when the tank is discontinued or an integrated Washlet control board has failed. We quote both so you can compare. Call (833) 467-9123 for a free second opinion on any written estimate.
Single-fixture Toto repairs are quoted as a flat written price, and the bathroom projects that most often surround a Toto install run in the ranges below. Every quote is a flat written price with a written scope before work starts, and no change proceeds without a signed change order. Call (833) 467-9123 for an exact quote – estimates are free.
| Service | Las Vegas Price Range |
|---|---|
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Book Your Toto Service in Las Vegas, NV
Whether it’s a hissing Drake fill valve, a scaled Washlet nozzle, or a full bathroom remodel planned around your Toto fixture, Rowan Construction Group Las Vegas quotes a flat written price before any work starts. Background-checked, uniformed technicians. Live person answering calls 24/7. Every visit includes a documented photo record. Call (833) 467-9123 for a free estimate and a free second opinion on any written estimate you already have.
Written by the team at Rowan Construction Group Las Vegas.












